CÀI ĐẶT:
---
Tìm link download ở link sau:
Code:
http://www.gargoyle-router.com/download.php Mục tiêu: Tìm model của router mình đang xài.
--> Tìm link có "squashfs-factory.bin" để upload từ webflash của http page của router stock firmware.
Ví dụ mình đang dùng TP-Link WDR 4300 v1 thì sẽ lượm file này:
Code: gargoyle_1.6.2-ar71xx-generic-tl-wdr4300-v1-squashfs-factory.bin Sau khi download, tùy stock firmware mà vào phần firmware upgrade mà load file mới vào. Sau khi load xong firmware mới thì renew lại IP vì lúc này IP mặc định là 192.168.1.1
Screenshot:
Một số lưu ý:
---
- Rất nhiều trick yêu cầu reset 30/30/30 trước khi up nhưng mình ko làm cũng ko sao.
- Renew IP nhanh nhất là disable/enable lại adapter.
- Khi load firmware Gargoyle, có thể filename làm lỗi ko load dc vì webflash chuối của stock firmware. Đơn giản là rename cái file bin thành 1 tên dễ dàng hơn như "gargoyle162.bin" là okie.
------------------
PPPoE:
---
Từ browser gõ 192.168.1.1, password mặc định là "password" sau đó web page sẽ yêu cầu bạn đổi password, thích gì làm đó hay để password như mặc định cũng dc.
Bạn vào Connection ==> Basic tab, điền và chọn 1 số thông tin ==> save ==> connected
1. Device as gateway
2. Connected via PPPoE Wired
3. User name - liên hệ nhà đài từ giấy nghiệm thu
4. Pasword - liên hệ nhà đài từ giấy nghiệm thu
5. Phần LAN thích thì sửa lại mạng 192.168.0.x như mình ko thì để nguyên.
6. Phần DNS thì chỉnh lại Google DNS cho facebook.
7. Phần wireless thì chỉnh như trước đó đã configure, tên mạng, password.
Sau phần này, cơ bản là bạn đã thay thế dc stock firmware, kết nối vào mạng internet như bình thường.
Một số lưu ý:
---
1. Nhà đài quản lý MAC thì gọi nhà đài nếu bạn vừa chuyển sang router mới load Gargoyle luôn.
2. Có một ít delay, mình thấy khoảng 2 min thì mạng okie thông suốt.
Screenshot:
1. Basic configuration:
2. WAN Connection UP:
THEME:
====
Một thực tế là interface mặc định của Gargoyle thì chuối vì nó quá xấu cho nên khi đã configure dc PPPoE thì cái đầu tiên xử lý sẽ là theme. Phần này mình sẽ làm qua putty SSH session.
1.Download putty về:
Code:
http://www.putty.org/ 2. Chạy Putty, gõ vào địa chỉ IP của router ==> enter ==> confirm SSH session ==> account là "root", password là password đã setup ở trên.
---
3. Giao diện console sau khi logged thành công:
---
4. Đến đây thì bạn ko cần phải suy nghĩ nhiều, chạy các lệnh sau:
---
Command:
Code: root@Gargoyle:~# opkg update Output:
Code: Downloading package list for attitude_adjustment source... Package list for attitude_adjustment downloaded successfully. Downloading package list for gargoyle source... Package list for gargoyle downloaded successfully. Command:
Code: root@Gargoyle:~# opkg list|grep theme Output:
Code: luci - 0.11.1-1 - Standard OpenWrt set including full admin with ppp support and the default OpenWrt theme luci-theme-base - 0.11.1-1 - Common base for all themes luci-theme-bootstrap - 0.11.1-1 - Bootstrap Theme luci-theme-freifunk-bno - 0.11.1-1 - Freifunk Berlin Nordost Theme luci-theme-freifunk-generic - 0.11.1-1 - Freifunk Generic Theme luci-theme-openwrt - 0.11.1-1 - OpenWrt.org (default) plugin-gargoyle-theme-by-matei - 1.6.2-1 - Theme by Matei for Gargoyle plugin-gargoyle-theme-dark-one - 1.6.2-1 - "Dark One" Theme for Gargoyle plugin-gargoyle-theme-demantoid - 1.2-1 - Demantoid theme for Gargoyle plugin-gargoyle-theme-green - 1.6.2-1 - Green Theme for Gargoyle plugin-gargoyle-theme-horchata - 1.1-1 - Horchata Theme for Gargoyle plugin-gargoyle-theme-light - 1.6.2-1 - Light Theme for Gargoyle plugin-gargoyle-theme-xeye - 1.6.2-1 - Xeye Theme for Gargoyle - it's themeable. Then copy all your theme files to the appropriate place (on a non-volatile root@Gargoyle:~# Command:
Code: opkg install plugin-gargoyle-theme-xeye ==> Đây là theme mình đang xài, gọn và sạch.
Lúc này thì quay lại browser, vào System tab, sẽ có 1 mục Theme và chọn Xeye là được.